Why LUTs don't work on your footage (and how I fixed it for every camera)

Log footage of a woman in a car graded with the XPS 160 film emulation LUT built for its camera profile

I've bought a sh*t ton of LUT packs over the years. And almost every time it went the same way. The promo reel looked stunning. Then I dropped the LUT on my own footage and the skin turned orange, the whites drifted blueish and the highlights blew out. So I pulled the opacity down until the look was basically gone and called it a "starting point". Sound familiar?

For a long time, especially in the early YouTube filmmaking days I thought I was doing something wrong. I wasn't. And you probably aren't either. Here's why most LUTs don't work on your footage, what actually fixes it, and why I ended up building my own.

Why LUTs don't work on your footage

A LUT (lookup table) is fixed color math. It takes every color in your image and swaps it for a new one from a table. That table was built for one specific input. If your footage doesn't match that input, the LUT still does exactly the same math. Just on the wrong colors. That's the whole problem in one sentence.

In practice it breaks for three reasons.

1. It was built on someone else's camera

Most LUT packs are made on one camera, in one light, for one log profile. But every camera records light with its own log curve and its own colors. S-Log3 from a Sony, Apple Log from an iPhone and D-Log M from a DJI drone all look flat and gray on screen. Under the hood they are completely different. A LUT made for one of them pushes the others too far: blown highlights, crushed shadows, orange skin. Or sometimes the exact opposite.

LUT made for another camera profile applied to log footage: oversaturated blue sky and crushed shadows

Same shot with a film LUT built for the right camera profile: balanced sky and natural film colors

Same clip, same look. Top: a LUT made for a different profile. Bottom: the LUT built for the profile the clip was shot in.

2. You had to convert to Rec.709 first

A lot of LUT packs are made for Rec.709. So you first convert your log footage with a conversion LUT and then put the creative LUT on top. Sounds good, as this also makes it more compatible (your favorite creator now can sell it as a LUT that fits EVERY camera out there). But that conversion already clips your highlights before the look even starts. You shot log for the dynamic range and then threw part of it away in step one.

3. The look has a color shift baked in

Many "cinematic" LUTs which are basically "creative LUTs" bake a strong color shift into the midtones. That looks great on the one hero shot it was designed on. On your footage, every small white balance error from set gets louder, and faces are always the first thing to break. Then you end up masking skin by hand. Clip by clip.

Under the hood: log curve and gamut

Let's get a bit nerdy, because this is where it all makes sense. Every log profile is really two things: a log curve and a gamut. When people say "S-Log3", they usually mean both, but they do completely different jobs.

The log curve decides where your brightness lands

Your sensor sees light in a linear way: twice the light, twice the signal. A log curve squeezes that huge range into your file, so the highlights don't clip and the shadows don't drown in noise. Every manufacturer squeezes differently. Sony S-Log3 puts 18% middle gray at around 41% on the waveform. Canon Log 3 puts it at roughly a third. So the same gray card sits at a different value in the file, depending on the camera.

A LUT doesn't know which camera the file came from. It just reads values. Feed Canon Log 3 into a LUT that was built for S-Log3 and it reads your perfectly exposed shot as roughly a stop underexposed. Shadows get crushed, contrast goes the wrong way, and you start pushing exposure to fix something that was never wrong.

Don't get me wrong, this won't happen everytime - I also used our own Canon LUTs on some Sony ACII footage and it just looked perfect. But yeah...it's a gamble.

The gamut decides where your colors land

The gamut (the color primaries) defines what "pure red", "pure green" and "pure blue" mean in your file. S-Log3 can be recorded with S-Gamut3 or with S-Gamut3.Cine. Same curve, different colors. Apple Log on the iPhone 15 Pro uses BT.2020 primaries, Apple Log 2 on the iPhone 17 Pro uses Apple's own, wider gamut.

Use a LUT for the wrong gamut and something sneaky happens: the grays look almost fine, because neutral stays neutral in most gamuts. But every saturated color shifts. Reds turn orange, skies drift cyan or go nuclear, greens get that weird plastic look. That's why a "wrong" LUT often looks almost right, and you lose an hour trying to fix the last 20%.

Is it my footage or the LUT?

Before you blame the LUT, check these four things. They cause half of the "this LUT looks terrible" moments I see in comments and support mails:

  • Automatic log conversion is on. Final Cut Pro puts a Camera LUT on Apple Log footage by default, Premiere Pro detects log automatically sometimes. If your editor already converted the clip, your creative LUT gets the wrong input. Turn it off first: Camera LUT set to None in Final Cut Pro, Auto Detect Log Video Color Space off in Premiere Pro, DaVinci YRGB without color management in Resolve.
  • Your corrections sit after the LUT. Exposure, white balance and contrast belong before the LUT in your grading chain. A LUT can't fix what it doesn't know is wrong.
  • Wrong profile picked. S-Log3 with S-Gamut3.Cine is not the same as S-Log3 with S-Gamut3. Check what your camera actually recorded.
  • 8-bit footage. If your camera can record 10-bit or even 12-bit, use it. 8-bit log falls apart much faster under any look.
  • You exposed to the right. Look LUTs are built for normal exposure. If you overexpose log on purpose (ETTR), bring the exposure back down before the LUT, otherwise everything looks washed out.

If all of that is right and the LUT still looks off, it's the LUT. More precisely: the LUT was never made for your camera.

The fix: one LUT for every camera profile

The real fix is simple to say and a lot of work to build. The look has to be made for your exact camera profile. Not "Sony footage" in general. Your camera, your log curve, your gamut.

S-Log3 portrait with a generic third-party LUT: teal cast and off skin tones

Same S-Log3 portrait with a camera-matched film LUT (XPS 160): natural skin tones

S-Log3 portrait. Top: a generic LUT. Bottom: the XPS 160 Film LUT built for S-Log3.

How I build a film LUT

That's exactly how I built The Film LUTs Collection. Every Film LUT runs through the same chain, once for every camera profile:

  1. Undo the log curve. The camera's curve gets decoded back to linear scene light, so a gray card is a gray card again, no matter if it came from a Sony, a Canon or an iPhone.
  2. Bring the colors into one working space. The camera's gamut gets converted into one wide working gamut. From here on, every camera speaks the same language.
  3. Put the film stock on top. This is where the look lives. A film stock is way more than a tint: its own contrast curve with a soft shoulder in the highlights, the way its color layers bleed into each other, how saturation behaves in the shadows versus the highlights.
  4. Output for your screen. Finally everything goes to Rec.709, the standard for pretty much every screen your video ends up on.

Then the whole chain gets baked into one .cube file per camera profile. So for you it's still just one LUT. No conversion LUT first, no extra steps. You basically have a technical AND a creative LUT in one file. Because steps 1 and 2 are different for every camera, but step 3 is always the same, the look stays identical across cameras.

Log curves of different cameras mapped into one working space, the color science behind camera-matched film LUTs

The result: Vision3 500T looks like Vision3 500T on a Sony FX3, on an iPhone 17 Pro and on a DJI Osmo Pocket. 20 looks for 57 camera profiles, so 1140 LUTs in total. And because every look also comes for Rec.709 and sRGB, it works on footage that was never shot in log.

17, 33 or 65 points: why LUT size matters

A 3D LUT is a cube of colors. Along each axis (red, green, blue) it stores a fixed number of points, and for each point it says: this input color becomes that output color. Everything in between, the app has to guess. That guess is called interpolation.

  • A 17 point LUT stores 17 × 17 × 17 = 4,913 colors.
  • A 33 point LUT stores 35,937 colors. That's what most LUT packs ship.
  • A 65 point LUT stores 274,625 colors. Almost eight times as many as a 33 point LUT.

The fewer points, the more the app has to guess. With a gentle look that's fine. With a film stock, which bends colors in very specific ways, the guessing shows up as banding in skies, steps in skin tones and blotchy gradients. That's why each of our Film LUTs is a 65 point LUT, built with tetrahedral interpolation. Tetrahedral splits every little cube between the grid points into smaller pyramids and blends from the four closest points instead of eight. It keeps grays neutral and gradients smooth, which is exactly where cheap LUTs fall apart.

And by the way, this is also why a 3D LUT can do things a 1D curve can't. A 1D LUT changes red, green and blue separately. A 3D LUT can say "this orange gets a bit less saturated, but only in the highlights". That kind of color crosstalk is what makes film look like film.

What a LUT can't do

I want to be honest here, because a lot of LUT marketing isn't. A LUT can only change hue, saturation and luminance. It works pixel by pixel. Anything that needs the pixels around it or the next frame is impossible with a LUT alone. Halation around bright lights, diffusion and bloom, organic film grain. No LUT on this planet can do that.

So a LUT gives you the color of film. For the texture of film you need a plugin.

Why I didn't just tell you to use EMUL8

If you've followed CINEM8 for a while, you know EMUL8, our film emulation plugin. More than 4000 filmmakers use it, and it already solves the camera problem: it knows your camera profile and builds the whole film pipeline on top. Color science, halation, bloom, grain and chromatic aberration.

EMUL8 film emulation plugin for Final Cut Pro and DaVinci Resolve by CINEM8

But EMUL8 only runs in Final Cut Pro and DaVinci Resolve. And I kept getting the same message: "I edit in Premiere. Or CapCut. Or on my phone. Can I get the looks somehow?" Until now the honest answer was no.

So I took the color science of our new 20 film stocks and turned it into LUTs that work everywhere. Final Cut Pro, DaVinci Resolve, Premiere Pro, After Effects, Photoshop, CapCut, LumaFusion, Edits. If it loads a .cube file, the Film LUTs work.

20 film stocks on real footage

The looks go from the classic motion picture stocks (Vision3 50D, 250D, 200T and 500T, Eterna Vivid) to photo films like Portra 160 and 400, Ektar 100 and Gold 200, slide films like Velvia 50 and E100, all the way to Double-X in black and white. Here are a few of them on log footage:

Log footage of a woman in a car before the film LUT, flat and desaturated

Same shot with the XPS 160 film emulation LUT: film look with natural skin tones

Log original and XPS 160.

Original log footage before the Vision3 500T film LUT

Vision3 500T film emulation LUT applied to log footage

Log original and Vision3 500T.

Original log footage before the Portra 400 film LUT

Portra 400 film emulation LUT applied to log footage

Log original and Portra 400.

Low light shot of a woman holding a lamp at dusk, log footage before the film LUT

Low light shot of a woman holding a lamp at dusk, graded with a film LUT

Low light at dusk: log original and Film LUT.

Look names refer to the film stocks each look is modeled on. All trademarks belong to their owners. CINEM8 is not affiliated with any film manufacturer.

How to use a film LUT the right way

  1. Find your camera profile. Every camera brand has its own folder. Not sure which profile you shot? Search your camera model on the product page.
  2. Turn off automatic log conversion in your editor, so the LUT gets the real log footage.
  3. Do your basic corrections first. Exposure, white balance and contrast go before the LUT.
  4. Add the LUT for your profile. Custom LUT effect in Final Cut Pro, a node in DaVinci Resolve, Lumetri Creative in Premiere Pro, Adjustment > LUT in CapCut.
  5. Grade on top to taste.

Film LUT applied to log footage on a node in DaVinci Resolve

Want to see the look on your camera's monitor while you shoot? Many cameras only load 33 or 17 point LUTs. Our free LUT converter scales them down right in your browser.

FAQ

Why does my LUT make skin tones orange?

Because the LUT expects different footage. It was built on another camera or log profile, so it pushes your midtones too far, and skin is the first thing you notice. Turn off automatic log conversion, fix white balance before the LUT and use a LUT made for your camera profile.

Do I need to convert log to Rec.709 before adding a LUT?

Only if the LUT was made for Rec.709. A LUT built for your log profile goes straight from log to the look, and you keep the highlights the conversion would have clipped.

Can I use the same LUT on footage from different cameras?

The same look, yes. The same file, no. Every camera needs the version of the look that was built for its profile. That's why the Film LUTs come as one LUT per look and camera profile.

Do LUTs add film grain or halation?

No. A LUT changes color and contrast only. Grain, halation and bloom need a plugin like EMUL8 for Final Cut Pro or DaVinci Resolve.

Try it on your own footage

I built The Film LUTs Collection for everyone who loves the look of film but doesn't edit in Final Cut Pro or DaVinci Resolve. And for everyone who's just done fixing LUTs that were never made for their camera. 20 film stocks, 57 camera profiles, every editor. One-time payment, instant download.

Already using EMUL8? All 20 looks are coming natively to EMUL8 with the next update in January, as a free update.

Christian

The Film LUTs Collection by CINEM8: 20 film emulation LUTs for every camera and log profile

Continuar lendo

iPhone Camera Settings for Cinematic Videos: The Complete Apple Log Guide